Accu Battery Charger Overcharge Protection Control Modul - Hitam Termurah

Specifications:

Product Model:XY-L10A

Control voltage:DC6-60V

Control current:<10A

Control accuracy:0.1V

Output Type: Direct Output

Voltage error:±0.1V

Scope of application: various lithium batteries

First.Function description

1.Automatic Charge control function:

By setting the volt-HI:‘UP\\' volt-LI:‘dn\\';When the battery voltage is below the volt-LI:\\'dn\\',the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:\\'UP\\',the relay is diconnected and the automatic charge is completed once

2.Charge Time Control Function:

How to turn on the time control function?

After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:--:--h, the default does not turn on time control function;

After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI\\'dn\\', the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI\\'UP\\', relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI\\'dn\\', the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing;

Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours.

Second.Parameter Setting

a)Press and hold the SET key to enter the setting interface;

b)Switch the parameters you want to set by short press SET;

c)After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease); To set other parameters, repeat step b, c);

d)After all parameters are set, long press set key to exit and save;

Third.The Key Function Description:

In the Run interface (main interface):

Short press SET button to di