Gray Brushless Generator Automatic Voltage Regulator Board AVR Voltage Regulator SX460
Diskon:
65%
Harga Asli:
Rp 502,888
Harga:
Rp 283,617
Rating:
2.2
Suka:
3
Lokasi:
Luar Negeri
SX460 AVR - Automatic Voltage Regulator - Exact Generic Replacement
INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
Regulation: +/-1.0% , Thermal drift: 0.05% per deg. C change in AVR ambient
Unit power dissipation: 10 watts maximum - Build up voltage:4 Volts @ AVR terminals
SX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator(AVR) and forms part of the excitation system for a brush-less generator. In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals. Positive voltage build up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR. The AVR is linked with the main stator windings and the exciter field windings to provide closed loop control of the output voltage with load regulation of +/-1.0%. In addition to being powered from the main stator, the AVR also derives a sample voltage from the output windings for voltage control purposes. In response to this sample voltage, the AVR controls the power fed to the exciter field, and hence the main field, to maintain the machine output voltage within the specified limits, compensating for load, speed, temperature and power factor of the generator.
Some electrical components have random colors, but the effect is the same
Colour:Gray+black/Red+black
Material:Metal + plastic
Package Contents:
1 x SX460 Automatic Voltage Regulator(Gray )
1 set x accessories
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.