KONNWEI KW510 3 in 1 Full Automatic 12V Car Battery Tester Cranking Charger Analyzer

Konnwei KW510 is a professional battery charging tester, battery charger, battery maintenance (pulse repair), trickle charger and battery desulfator. with high precision features of konnwei battery tester, Kw510 is combing the battery charging and repair function and redesigning the products, makes the all-in-one battery maintenance tool, whcih is very useful and shorten your work and is A tool must have for all car owners.

Top reasons to choose KONNWEI KW510:

【All-in-one Battery Charger】

professional 3 in 1 battery tester, battery charger, battery maintainer(pulse repair), trickle charger and battery desulfator.

Accurate Battery Tester

KW510 provides you an overall analysis of battery health by checking its voltage charge, internal resistance then tells you whether the battery needs to be recharged. Also this battery tester runs cranking and charging system test and car alternator tester charging.

Fully Automatic Battery Charger】

charge batteries as low as 2-volt, max output 12-volt 5-amp. KW510 battery charger not only helps you charge the batteries but also adapts the newest pulse repair technology, one-click repair and automatically detects battery sulfation and acid stratification to bring the batteries back to life and restore their performance.

4.【Universal Compatible】

KW510 can test, charge and repair all 12-volt 100-2000CCA lead-acid batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. The perfect automotive battery tester to diagnose the batteries of cars, boats, lawnmowers, etc. KONNWEI KW510 support charge all 12V Lead-acid batteries

5.【Highest Safety Priority】

safety charging is the most important thing! Except the smart temp compensation that fits all climates and auto change to low current mode after fully charged, KW510 also supports up to 8 kinds of protection like reverse polarity, overload, over-current, overheat, cooling system, fireproof material, short circuit protection, etc.

KONNWEI KW510 Accurate Battery Tester

1. System voltage 12 Volts and Voltage test

give you results about the Status of Charge(SOC) and Status of Health (SOH)

2. Summary of test results, Good, Recharge or Replace

Good, Recharge or Replace

3. Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

Internal resistance value (mΩ) and Life in percentage (%) SOH

4. Cranking system test

Test and analyze the starting motor. Testing the actual required cranking current and cranking voltage of the starting motor is helpful to determine whether the starting motor works properly or not.

5. Charging system test

Check and analyze the vehicle battery charging system, including generator, rectifier, rectifier diode, etc., thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly and the abnormals.

6. Record and Review battery data.

7.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,DIN and IEC are supported