SpeedyBee VTX TX800 5.8GHz 48CH 800mW Output Power
Harga:
Rp 540,666
Rating:
4
Suka:
12
Lokasi:
KOTA JAKARTA UTARA
SpeedyBee TX800 5.6gr Light Weight VTX make your drone lighter, max 800mW output High - efficiency heatsink
Support IRC Tramp Protocol
TX800 supports the IRC TRAMP protocol and the modification of video transmission parameters through the remote control, Including frequency, working power and so on.
If your flight controller supports Bluetooth or WiFi, You can also modify the video transmission parameters through the SpeedyBee App.
Power Setup (Lock & Unlock)
The factory default setting is in LOCK mode with red LED blinking and only 25mW is availlable. You can switch to UNLOCK mode by long pressing the button for 10 seconds, and the red LED will be constant ON or OFF, but not blinking.
Specifications :
Frequency Channel : 5.8GHz 48CH
Output Power : PIT/25mW/200mW/400mW/800mW
Working Current : 5V@250~750mA
Voltage out : 5V@max 250mA
Voltage in : 3.7-5.5V
Video input impedance : 75 Ohm
Antenna Connector : MMCX
Weight : 5.6g (without antenna)
PCB Size : 28mm*28mm@20*20
Mounting holes : M4 holes on the PCB; M3 holes on the metal heat sink
Key Operation :
Short press the button to switch CH1/2/3/4/5/6/7/8.
Long press the button for 2 seconds to enter the BAND mode; then short press to
switch band1/2/3/4/5/6.
Long press the button for 5 seconds to enter the POWER mode; then short press to
switch to 25/200/400/800mw.
Long press the button for 10 seconds to unlock/lock
m*****a5 Tampilan:Keliatannya build quality jelek. tapi ternyata enggak!
Aseli vtx ini bagus banget. Awalnya underestimate liat cost produk yg cuma segini. Tapi pas dipakai, dibawah 200m jernih banget setara produk dengan harga 500rb++
Pernah ada yg review bahkan ini bisa sampe 7km