Wifi Wireless Router 4G LTE CPE Smartcom LX600 SIMCARD all operator

Wifi Wireless Router 4G LTE CPE Smartcom LX600 With Slot SIM CARD

MENGGUNAKAN SIM CARD

SUPPORT ALL SIM CARD INDONESIA

4G hardware paramters:

• CPU chipset: MDM9X07

• RAM: 256MB ROM: 512MB

• GPRS: Max 85.6Kbps (DL)/Max 85.6Kbps (UL)

• CDMA: Max 3.1Mbps (DL)/Max 1.8 Mbps (UL)

• WCDMA: DC-HSPA+, Max 42Mbps (DL)/Max 5.76Mbps (UL)

• TD-SCDMA: Max 4.2Mbps (DL)/Max 2.2 Mbps (UL)

• FDD-LTE: non-CA cat4,Max 150Mbps (DL)/Max 50 Mbps (UL)

• TDD-LTE: non-CA cat4,Max 130Mbps (DL)/Max 35Mbps (UL)

Main bands:

FDD operating band B1,B3,B5,B8

TDD operating band B38,B39,B40,B41

WCDMA: B1,B8 EVDO: BCO

TD-SCDMA: B34,B39,B40 GSM: 850,900,1800,1900

KETERANGAN SIMBOL

1.LAN : The indicator light is off, indicating that there is no network port equipment access The indicator light flashes, indicating that there is network port equipment access

2.WIFI : The indicator light off, indicating the device WIFI is not working The indicator light always on, indicating that WIFI of the device has been started WIFI The indicator ight flashes, indicating that there is a device connected to WIFI

3.4G lTE SIGNAL: indicator went out and no SIM card was found

4G indicator light always on, the equipment dials successfully

4.SYS LED. indicator lights out, the equipment is not connected to the module SYS SYS LED indicator lights shine, equipment link module success.

5.POWER Power plug, connected to 5v2a standard charging power supply Standard micro-USB access The network port can be used with ordinary network cable The LAN indicator flashes when the network cable is plugged in

6.WPS:This key enables the device quickly access the machine PESET:Press and hold the key for seconds with the SIM card pin to restore the factory settings RESET

RESET:Forget your password or upgrade your dMce Power key automatic boot after equipment is powered on without keys, this function is only R& Duse.

7.SIM This product supports network carD